Weight for the EcoSavers toilet cistern. Saving water in the toilet

Save water every time you flush the toilet, while maintaining complete control! EcoSavers® Water Saver for Toilet is a simple weight that intelligently modifies the operation of your cistern, helping to reduce water consumption without losing functionality.

The product has been designed to reduce the amount of water used during a standard short toilet flush. At the same time, you still have full control over whether you want to rinse briefly (e.g. after using the urinal) or long (when a full rinse is needed). This clever solution helps you save water every day. Note: The product is not suitable for concealed (built-in) cisterns.

Main Benefits of EcoSavers® Water Saver for Toilet:

• Water Savings: Reduces the amount of water used during a short press of the flush, which translates into lower water bills.
• Full Control Maintained: You can still perform a full, long flush by simply holding down the flush lever or button longer.
• Very Simple Installation: Installation takes literally a moment and does not require any tools - just remove the tank cover and hang the weight.
• Universal Fitment (Typically): Designed to fit the mechanisms of most standard external toilet tanks (compact toilets).
• Ecological Solution: Helps protect valuable water resources without complicated modifications.
• Low Cost, Immediate Effect: A simple and cheap method to start saving water in the bathroom.

How does it work? (Short and Long Flush Mechanism):

When you press the flush lever/button, the overflow pipe inside the tank rises, allowing water to flow into the bowl. The EcoSavers® water saver is a specially balanced weight that you hang on this overflow pipe.

• Short flush: As soon as you press and release the lever/button, the additional weight of the weight causes the overflow pipe to fall faster than normal, closing the water drain earlier. You use less water.
• Long flush: If you need a full flush, simply hold the flush lever/button pressed longer. As long as you hold it, the water flows freely. The flush will only stop when the lever/button is released and the weight pulls the pipe down.

How to Install? (It Can't Be Simpler!):

1. Remove the toilet tank cover.
2. Locate the overflow pipe (usually a vertical pipe in the middle of the tank that rises when you flush - if in doubt, flush to see which part moves).
3. Hang the EcoSavers® Water Saver weight on the upper edge of the overflow pipe or inside it (according to the design of your cistern - the weight should hang freely and weigh down the pipe when it is raised).
4. Put the toilet tank cover back on.

Done! You can start saving water.

Compatibility Notice:

This product is not suitable for concealed cisterns (built in the wall) where there is no easy access to the mechanism inside the tank. Works only with standard external toilet tanks (compacts).

Technical Specification:

• Product type: Water saver for toilet cistern (overflow pipe weight)
• Brand: EcoSavers®
• Model: Water Saver for Toilet
• Function: Shortens standard flushing, allows long flushing by holding
• Installation: Internal, on the overflow pipe of the toilet tank
• Compatibility: Most standard external toilet tanks (NOT for concealed cisterns).
• Material: Plastic / Coated metal (typical materials for this type of product)
• Color: Blue / Green (or other, depending on version)
• Certificates: CE

Start saving water with every flush without sacrificing the ability to do a full rinse when you need it! Install the simple and effective EcoSavers® Water Saver for Toilet weight – a small step for you, a big one for your bills and the environment.