E27 Bulb Holder with Twilight Sensor EcoSavers Automatic Light

E27 EcoSavers Intelligent Lamp Holder with Twilight Sensor and Timer (3 Modes)

Do you want your outdoor or indoor lighting to turn on automatically at dusk and turn off at dawn or after a specified time, saving energy? Or maybe you need a simple way to simulate being at home while on vacation? The EcoSavers Daylight Sensor Lampbase Timer is a brilliant "plug-and-play" solution! Simply screw this adapter into an existing socket with an E27 thread and then screw in an E27 bulb. The built-in dusk sensor and timer with three operating modes (including random mode) will provide you with comfort, safety and real savings on electricity bills.

Automatic and Intelligent Lighting Control Tailored to Your Needs:

• Three Different Operating Modes for Full Flexibility: Select the mode perfectly suited to your needs using two buttons on the housing:
  • Mode 1: Dusk to Dawn (Default): The lamp automatically turns on at dusk and turns off automatically at dawn.
  • Mode 2: Timer After Dark (1, 2, 4 or 8 hours): The lamp turns on automatically after dark, but only stays on for the time you choose (1, 2, 4 or 8 hours) and then turns off until the next evening. The selection is made cyclically by pressing the "Timer" button, and the number of LED flashes confirms the set time.
  • Mode 3: Random Anti-Burglar Timer: The lamp turns on and off automatically at irregular times after dark, simulating the activity of household members - a perfect solution for deterring potential burglars while you are away. Activation by a dedicated "Random" button, indicated by a separate LED.
• Built-in Twilight Sensor: The intelligent daylight sensor ensures that the bulb in automatic modes (1, 2, 3) only turns on when it is dark, preventing energy wastage during the day.
• Electricity Savings: By automatically turning off the light when it is not needed (during the day, after a set time or at dawn), you significantly reduce energy consumption. The lampholder itself consumes very little power in standby mode (less than 0.7W).
• Extremely Simple Plug & Play Installation: Installation is very simple. Simply turn off the power, screw the EcoSavers socket into the existing E27 socket and then screw in your E27 bulb. Done!
• Compatibility with E27 bulbs: The socket works with most standard bulbs with the popular E27 socket. Remember about the maximum permissible load: up to 60W for traditional incandescent bulbs and up to 20W for energy-saving CFL bulbs (compact fluorescent lamps) and modern LED bulbs.
• Comfort and Safety: Perfect solution for automating the lighting of the entrance, porch, terrace (in roofed places), corridors, and also as an element of the security system.

Available Operating Modes (Selected by Buttons):

• Mode 1: Dusk to Dawn (Default) - Turns on at dusk, turns off at dawn.
• Mode 2: Timer After Dark (Timer Button) - Turns on at dusk and stays on for the selected time:
  • 1 press: 1 hour (LED flashes 1 time).
  • 2 presses: 2 hours (LED flashes 2 times).
  • 3 presses: 4 hours (LED flashes 3 times).
  • 4 presses: 8 hours (LED flashes 4 times).
  • 5 presses: Return to mode 1.
• Mode 3: Random Anti-Theft Timer (Random Button) - Turns on/off at irregular times after dark. The "Random" LED lights up. Press again to turn off.
• Override Mode: Press Timer + Random at the same time to turn the light on permanently.

Technical Specification:

• Device type: Smart lamp holder / E27 adapter with twilight sensor and timer
• Shaft / Thread: E27
• Supply voltage: 220-240V AC / 50Hz
• Maximum load: Traditional bulb: 60W; CFL/LED bulb: 20W
• Power consumption in standby mode: < 0.7W
• Sensor: Built-in twilight sensor
• Timer functions: From dusk to dawn, Timed (1/2/4/8h after dark), Random (anti-burglary)
• Controls: Buttons (Timer, Random)
• LED indicators: Yes (mode indication)
• Intended use: For indoor or outdoor use in protected fixtures (IP20 or higher - requires verification)

Simple Installation and Operation:

1. Turn off the power to the lighting fixture.
2. Screw the EcoSavers adapter into the E27 socket.
3. Screw the E27 bulb (max 60W/20W) into the adapter.
4. Turn on the power. The adapter will start in default mode (Dusk Till Dawn).
5. Use the Timer or Random buttons to select a different operating mode if you need.