{"product_id":"ecosavers-thermo-switch-control-for-floorheating-1","title":"EcoSavers Thermo Switch Control for floorheating","description":"\u003ch2\u003eIntelligent EcoSavers Thermo Switch (Thermostat for Socket)\u003c\/h2\u003e\n\n\u003cp\u003eDoes your underfloor or radiator heating circulation pump run unnecessarily around the clock, even in summer, generating additional costs and consuming energy? \u003cstrong\u003eEcoSavers Thermo Switch\u003c\/strong\u003e is a brilliantly simple and extremely effective solution that will allow you to optimize its operation! This intelligent plug-and-play temperature switch, equipped with an external temperature sensor, automatically controls the power supply of the connected device (e.g. central heating pump, radiator, fan) depending on the temperature measured on the installation pipe or in the surroundings. \u003cstrong\u003eTurn on devices only when you really need them and start saving real money on your electricity bills!\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eHow does it work and what do you gain? Main Features of the EcoSavers Socket Thermostat:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSignificant Electricity Savings:\u003c\/strong\u003e Perfect for controlling circulation pumps in central heating installations. (central heating) and domestic hot water (hot water). It prevents them from running continuously 24\/7, especially during transitional or summer periods when there is no real demand for heat. It turns on the pump only when the temperature of the supply pipe reaches the threshold you set, signaling active heating.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtremely Simple Operation Using the Knob:\u003c\/strong\u003e Forget about complicated menus, programmers and displays! Just set the desired temperature at which the device should turn on or off (in the range from 9°C to 60°C) using a large, convenient and clearly marked knob. The setting accuracy is approximately ±0.5°C.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecise External Temperature Sensor on Cable:\u003c\/strong\u003e Accurate temperature measurement is provided by an external sensor placed at the end of a flexible cable about 3 meters long. The included special spring clip facilitates quick and stable mounting of the sensor directly on the metal pipe of the heating or cooling system.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIntelligent Pump Maintenance Program (Preventing Seizing):\u003c\/strong\u003e To protect the circulation pump impeller against seizing during long periods of inactivity (e.g. in summer), Thermo Switch is equipped with an intelligent maintenance function. It automatically starts the connected pump for a short while (approximately 1 minute) every 24 hours of inactivity. This function can be easily turned off if necessary using a dedicated switch.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Application Thanks to Two Operating Modes:\u003c\/strong\u003e A switch hidden under a small flap allows you to select the operating logic of the thermostat, extending its use beyond pump control:\n        \u003cul\u003e\n           \u003cli\u003e\n\u003cstrong\u003e\"HEAT\" mode:\u003c\/strong\u003e The socket turns on when the measured temperature rises ABOVE the set value (e.g. to control a central heating pump, cooling fan, air conditioner).\u003c\/li\u003e\n           \u003cli\u003e\n\u003cstrong\u003eCOOL mode (Cooling\/Heating according to low temperature):\u003c\/strong\u003e The socket turns on when the measured temperature drops BELOW the set value (e.g. to control an electric heater, heating mat, anti-freeze system).\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClear LED Operating Status Indicators:\u003c\/strong\u003e Two LEDs on the front panel provide current information about the current operating status of the device: \u003cstrong\u003eThe green LED\u003c\/strong\u003e lights up when the socket is active and the connected device is working. The \u003cstrong\u003eRed LED\u003c\/strong\u003e lights up when the socket is inactive (device turned off). Additionally, a separate LED indicates the activity of the pump maintenance program (if enabled).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstant Plug \u0026amp; Play Installation:\u003c\/strong\u003e Installation and commissioning are extremely simple and do not require any tools or specialist knowledge. Just connect EcoSavers Thermo Switch to a standard power socket, connect the plug of the controlled device to it and attach the temperature sensor in the right place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specification:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 230V AC \/ 50Hz\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum socket load:\u003c\/strong\u003e 9A \/ 2070W (for resistive load)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSocket\/plug type:\u003c\/strong\u003e Type F (Schuko) - with grounding, compatible with the Polish standard\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature adjustment range:\u003c\/strong\u003e 9°C to 60°C\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSetting accuracy \/ temperature hysteresis:\u003c\/strong\u003e ± 0.5°C (typical)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTemperature sensor:\u003c\/strong\u003e External, wired (cable length approx. 3 meters), with pipe mounting clip\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOperating modes:\u003c\/strong\u003e Turning on when the temperature increases (HEAT) \/ Turning on when the temperature drops (COOL) - selected with an internal switch\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePump maintenance program:\u003c\/strong\u003e Yes (cycle: 1 minute on\/24 hours idle), deactivable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e Operating status (socket active\/inactive), Maintenance program active\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower consumption in standby mode:\u003c\/strong\u003e Less than 1 W\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIntended use \/ Degree of protection:\u003c\/strong\u003e For indoor use in dry rooms (IP20)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation and Operation (Example for Underfloor Heating Circulation Pump):\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eBefore connecting, make sure that the internal mode switch (under the flap on the back of the device) is set to the \"HEAT\" position (marked with a flame or heater symbol - the device will turn on when the supply pipe gets hot).\u003c\/li\u003e\n    \u003cli\u003eConnect the EcoSavers Thermo Switch to a power socket close to the circulation pump.\u003c\/li\u003e\n    \u003cli\u003eUse the knob to set the desired temperature at which the pump is to be activated (for underfloor heating it is usually in the range of 28-35°C, depending on the installation).\u003c\/li\u003e\n    \u003cli\u003eConnect the power plug of the circulation pump to the socket on the Thermo Switch.\u003c\/li\u003e\n    \u003cli\u003eCarefully attach the temperature sensor using the supplied clip directly to the metal pipe supplying the heating circuit (the pipe that becomes hot when the furnace supplies heat), as close to the distributor or heat source as possible. Make sure the sensor adheres well to the pipe surface for accurate measurement. Avoid mounting on the return (colder) pipe.\u003c\/li\u003e\n    \u003cli\u003eTurn on the main power supply to the thermostat using the ON\/OFF switch located on its housing.\u003c\/li\u003e\n    \u003cli\u003eWatch the LED indicators: Green means the pump is running (because the pipe temperature has exceeded the set threshold). Red color means that the pump is turned off (because the pipe is cooler than the set threshold).\u003c\/li\u003e\n    \u003cli\u003eDecide whether you want to use the pump maintenance program (enabled by default). If not, you can turn it off with a dedicated switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n--- Temu Parameters ---\nFulfillment Type: cross_border\nShipment Limit Day: 14\nColor: Multicolor\nMaterial: Metal\nSize: Standard Size\nStyle: Modern\nComposition: 100% Plastic\nApplicable People: Unisex\nItems: 1\nModel: Standard\nQuantity: 1\nWeight: Standard Weight\nAccessory: No\nApplication Area: General\nBrand: EcoSavers\nBrand Trademark: EcoSavers\nControl Method: Switch\nEu Doc Legislation: CE, RoHS, WEEE\nEu Energy Label Brand: EcoSavers\nEu Energy Label Model Id: GENERIC-STD\nLight Bulb Features: Standard\nLight Color: White\nMounting Type: Floor Standing\nSpecific Application Scenario: General\nWarning Safety Info: Read all safety instructions before use. Keep away from children. Do not disassemble.\nWaste Recycling Logo: Yes, WEEE compliant\nPower Mode: Electric\nProduct Identification: 8717853705472.0\nPackaging Material: Cardboard\nMajor Material: Metal","brand":"ecosavers.club | the power of savings | Join Now!","offers":[{"title":"Default Title","offer_id":52905835593994,"sku":"8717853705472 EcoSavers Thermo Switch","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0889\/3710\/3626\/files\/1759812207651_8717853705472-ecosavers-thermo-switch_packshot_product-view_12_8717853705472-2070w-230v-50hz-ecosavers.club-eco-friendly-sustainable-green-energy-rene_226b372a-2768-4ece-b406-8ad955f0af08.jpg?v=1776898735","url":"https:\/\/ecosavers.club\/es-es\/products\/ecosavers-thermo-switch-control-for-floorheating-1","provider":"ecosavers.club | the power of savings | Join Now!","version":"1.0","type":"link"}